Supplier development
How to prevent the next supplier disruption
Use the lessons from a recovery to improve planning, communication and process controls before the same problem returns.
Read the insightAEROVION Insights
Perspectives on supplier development, production readiness and operational excellence for aerospace teams.
Supplier development
Use the lessons from a recovery to improve planning, communication and process controls before the same problem returns.
Read the insightProduction readiness
Three questions to test whether teams can spot constraints, mobilise a response and sustain a higher production rate.
Read the insightOperational excellence · SQDCEP
On-time delivery is back on target. What happens when overtime, extra inspection and rework come down?
Read the insightOperational excellence
Use customer impact and operational risk to decide what needs escalation and what the team can resolve locally.
Read the insightSupplier development
When supplier performance deteriorates, escalation, containment and a recovery plan can stabilise deliveries. Once the immediate risk is under control, the recovery review is an opportunity to identify the conditions that could cause the problem to recur.
Trace what happened across forecasting, engineering changes, purchasing, production planning and the supplier’s process. For example, if a qualification milestone slips, compare the timing of drawing releases and approvals with the supplier’s tooling, validation and staffing plans. Agree what the evidence supports and assign each action to the team that can make the change.
Powell and Coughlan’s research on lean supplier development describes how teams can build the capability to learn together. In practice, that means putting the lessons from a disruption into the routines teams already use. Updated handover criteria, an earlier readiness review or a clearer escalation trigger can carry that learning into the next programme.
Put it into practice
Before closing a recovery plan, identify which routine or control changed, who owns it, and how you’ll check that it works on the next similar job.
Production readiness
Airbus reported a backlog of 9,222 commercial aircraft at the end of June 2026. Boeing’s 2026 Commercial Market Outlook forecasts demand for about 44,000 new passenger jets and freighters worldwide through 2045. For manufacturers and suppliers, that puts sustained production readiness on the agenda.
Equipment, people and process capability are part of the answer. David Teece’s dynamic capabilities framework suggests three further questions for a rate-readiness review.
Put it into practice
At the next rate gate, ask what output the process has demonstrated under normal working conditions, which constraint could cap the next increase and what evidence is still needed.
Operational excellence · SQDCEP
Consider a supplier that clears its backlog through weekend shifts, additional inspection and rework. On-time delivery returns to target. Can the process sustain that output once the temporary measures end?
AEROVION uses SQDCEP to consider Safety, Quality, Delivery, Cost, Environment and People together. In a supplier recovery review, the useful measures are the ones that explain how performance was achieved and whether it can hold. Scrap per conforming part, unplanned overtime and trained-operator coverage across shifts are three examples.
If delivery improves while rework stays high and output still depends on weekend shifts, the immediate recovery may be working. Before closing the action plan or committing to a higher rate, check that the supplier can meet demand during normal operations, with stable first-pass yield and enough trained people to run the process.
That is how AEROVION applies Lean–Sustainability 4.0 to supplier development. The evidence used to close a recovery plan should show that the process can keep delivering once the temporary measures end.
At the next recovery review
Agree what normal operating conditions look like and what evidence will show the supplier can meet demand under those conditions.
Operational excellence
A concern can trigger meetings and action logs before the team has agreed what is at risk. Start with a quick assessment of the requirement involved, the potential impact and who can act.
This applies the Lean principle of starting with customer value while giving teams a practical way to match the response to the risk.
Put it into practice
At your next daily review, ask what could be affected, who can act, and what would trigger escalation. Use the answers to decide the level of investigation.